Bianca – PL162T-EU (V3) 2023
Bianca – PL162T-EUCW (V3) 2023
Bianca – PL162T-EUCB (V3) 2023
BIANCA PL162T-EU V3
New software – Updated the software operating the machine. This has allowed us to new Low flow function, the stand-by mode and the warm-up optimization.
LCC – LELIT Control Center V3
In Bianca – PL162T-EU V3 LCC new functions have been included a number of settings upgrade in machine:
- The temperature of the coffee dispensed.
- The temperature of the steam dispensed.
- Steam boiler enabling/disabling.
- Selection of the temperature unit measure.
- Programmable pre-infusion times.
- Programmable low flow times.
- Sleepy mode enabling/disabling.
- Partial and total doses counter.
- Chronometer of the coffee dispensing.
Stand-by mode After 30 minutes of inactivity, the machine will go automatically in stand-by mode. The ON/OFF light blinks.
Low flow START which refers to the time slot from zer0 till what the user sets.
Low flow FINAL which refers to the time slot from what the user sets till the end of coffee brewing.
Brew temp off set This value either increases or decreases the coffee boiler temperature during coffee brewing, changing the temperature of the water coming out of the grouphead.
TECHNICAL FEATURES
- 800 ml stainless steel coffee boiler
- 1.5 L stainless steel steam boiler / E61 group with paddle to regulate the water flow on the coffee puck
- Professional water-steam taps with spring closure / I/O back-lit stainless steel switch / Programmable pre-infusion parameters through LCC
- LCD high resolution graphic display
- 58mm filterholder with wood handle and exclusive Coffee Slide
- Possibility of direct water plumbing and direct drain
- Possibility to disable the steam boiler only
- Programmable Stand-by function
- Partial and total doses counters
- Possibility to place the water tank on the three sides of the machine
- Mug friendly and espresso cup rack.
- Water tank: 2.5 L
- Rotative pump motor: 150W
- Dimensions WxDxH: 29 x 48.5 x 40 cm
- Coffee boiler heating element: 1400W
- Steam boiler heating element: 1400W
- Voltage: 220-240V 50-60Hz
- Weight: 26.5 kg
MARA X PL62X V2
Features:
- 1.8L stainless steel boiler with heat exchanger and thermo-siphon double cycle system to have the brewing group and the boiler always warm, at the right temperature.
- Internal pipes in copper.
- Internal PID temperature controller instead of mechanical pressure stat for stable temperature control
- Double manometer to check the brew and steam pressure.
- Stainless steel on/off switch.
- Separate pilot lights.
- Water level control in the tank and automatic heating element cut off in cases of lack of water.
- Manual rearm security thermostat.
- Settable over pressure valve.
- Anti-burn steam and water wands.
- 58mm LELIT filter holder to be operated with ground coffee.
- Dimensions: 220 x 410 x 350mm (length x depth x height)
- Weight 18.8kg
Includes:
- blind filter
- 1 double portafilter
- single, double and triple filter baskets
- 35L water softener
- The Mara X comes with a 58.55 tamper so no need to purchase a precise fit
ELIZABETH PL92T
- Wide cup warmer
- Multidirectional, anti-burn steam wand
- Fixed water wand
- Mug friendly – espresso cup rack
- Wide water tray in stainless steel complete with self-cleaning grate
- Back lit manometer for coffee pressure
- LCC – New Lelit electronic control system
- 58 mm filterholder with ergonomic handle and exclusive Coffee Slide
- Back lit, stainless steel switches
- Brushed stainless steel appliance body
3 way solenoid valve to dry up the coffee puck
- 300 ml brass boiler
- 600 ml stainless steel steam boiler
- 58mm filterholder with new Lelit ergonomic handle
- Graphic indication for lack of water in the tank
- Possibility to cut off the steam boiler only
- Programmable pre-infusion parameters through LCC
- Stand-by according to CEI EN 50564 norm
- LCD high resolution graphic display.
- Water tank:2.5 l
- Coffee/water/steam pump:15 bar
- Dimensions LxPxH:31x27x38 cm
- Coffee boiler heating element:1200W
- Steam boiler heating element:1000W
- Voltage:230V 50Hz
- Weight:12 kg
Kate – PL82T
KATE PL82T
- Wide cup warmer.
- Back lit, round switches in stainless steel.
- Multidirectional steam/water wand.
- Mug friendly.
- Wide water tray in stainless steel complete with self-cleaning grate.
- Back lit manometer for coffee pressure.
- LCC – New Lelit electronic control system.
- 58mm filterholder with ergonomic handle and exclusive Coffee Slide.
- Programable grinding time for 1 or 2 doses through the LCC.
- Brushed stainless steel appliance body
- 3 way solenoid valve to dry up the coffee powder
- 300 ml brass boiler
- Graphic indication for lack of water in the tank
- Programmable pre-infusion
- Built-in grinder with Ø 38mm conical burrs and micrometric stepless grinding adjustment
- Stand-by according to CEI EN 50564 norm
- LCD high resolution graphic display
- 58 mm commercial ¬filterholder
- Water tank: 2.5 l
- Coffee/water/steam pump: 15 bar
- Dimensions LxDxH: 33,5×27,5×44 cm
- Boiler heating element: 1200W
- Voltage: 230V 50Hz
- Weight: 12 kg
ANITA PL042TEMD
- Cup warmer.
- Stainless steel water tray grate.
- Lever switches.
- Manometer for coffee pressure.
- Multidirectional steam/water wand.
- PID boiler controller for coffee and steam temperature.
- Stainless steel appliance body
- Tank water level visible from the side and from the front
- 3 way solenoid valve to dry up the coffee powder
- Built-in grinder with Ø 38mm conical burrs and micrometric stepless grinding adjustement
- Built-in tamper
- 250 ml brass boiler
- 57 mm filterholder.
- Water tank: 2.7 l
- Coffee/water/steam pump: 15 bar
- Dimensions LxDxH: 31,5x27x37 cm
- Boiler heating element: 1000W
- Voltage: 230V 50Hz
- Weight: 10.2 kg
ANNA PL41TEM
- Cup warmer.
- Stainless steel water tray grate.
- Oval chromed switches.
- Steam/water wand.
- Manometer for coffee pressure.
- Stainless steel appliance body
- Tank water level visible from the side
- 3 way solenoid valve to dry up the coffee powder
- 250 ml brass boiler
- 57 mm filterholder
Water tank:2,7 l
- Dimensions LxDxH:23×28,5×34 cm
- Boiler heating element:1000W
- Voltage:230V 50Hz
- Weight:7,2 kg
GIULIETTA PL2SVX
Features:
- Operates from a standard 10Amp powerpoint;
- Temperature stable – no cooling flushes required;
- Great steam – microfoam is easy;
- Comfortably makes 120 regular milk coffees per hour without dropping boiler pressure or brew temperature;
- 10 lt copper boiler with transversal heat exchangers and front injector keeps constant water temperature;
- E61 type groups, NSF-treated, heated with thermo-siphonic cycle system;
- Rotary pump;
- Beautiful ultra-polished stainless steel finish for the front panel, brushed stainless steel on the side with stainless steel cup surround;
- Dual-acting, high-precision gauge shows both pump pressure and boiler pressure during extraction;
- Multi-directional steam and water wand allow movement of steam wand in many different directions;
- 2 x cool touch steam wands;
- 1 x centrally mounted water wand;
- Wide cup warmer;
- Adjustable feet;
- 58 mm commercial filterholder;
- Easy inspection and cleaning;
- ECO mode;
- Ready for use in 30 minutes;
- Programmable pre infusion;
- Dimensions LxDx H: 58x48x49cm
- 2 x portafliter
- Single and double filter baskets
- Blind filter basket
- Plastic tamper
- 2 cup racks
- Cleaning Brush
Totally MADE IN ITALY
Knock box drawer PLA360M
Price: HK$980
- Brushed stainless steel body, smooth finish with soft edges
- Stainless steel handle
- ABS moulded drawer, dish washer safe
- Ventilation holes to get rid of humidity and heat
- Anti-stain rubber feet to improve stability, absorb knocks and avoid scratching the bench
- Solid rubber knock bar for silent operation and long-life
- Silk-screen printed upper surface with Lelit logo
- Open storage compartment with magnets to position it in the back of the knock box or laterally
- Dimensions LxDxH: 200x390x78 mm
- Weight: 2,5Kg
- Drawer capacity: 70 coffee pucks
Knock box PLA360S
Price: HK$780
Lelit cylindrical knock box Ø10,5 cm with micro-fiber cloth and brush.
Coffee leveler PLA482A/PLA472A
Price: HK$500
Pre-tamp coffee leveler ø58 mm/ø57 mm.
Tamper PLA481A/PLA471A
Price: HK$550
Aluminium Tamper ø58 mm/ø57 mm
Temper PLA481R
Price: HK$480
Red Wooden Tamper ø58 mm
Bottomless PLA580W
Price: HK$780
Bottomless filterholder with walnut wooden handle. It includes a stainless steel 2 doses PLUS filter (18-21 g), in collaboration with IMS. For machines with LELIT58 group.
Milk Pitcher
PLA301S – 350ml
Price: HK$480
PLA301M – 500ml
Price: HK$550
PLA301S
35 cl milk jug with an essential design characterised by the anti-drip spout, which ensures precision in the execution of the most particular motifs. Made of stainless steel and dishwasher safe. It includes a latte art pen.
PLA301M
50 cl milk jug with an essential design characterised by the anti-drip spout, which ensures precision in the execution of the most particular motifs. Made of stainless steel and dishwasher safe. It includes a latte art pen.
CONTACT INFORMATION
LELIT HONG KONG – CITY PRO LIMITED
Address: FLAT 09, 10/F, INTERNATIONAL PLAZA,
20 SHEUNG YUET ROAD,KOWLOON BAY, KOWLOON.
https://lelithk.com
E-mail: lelithk@gmail.com
Phone: +852 2337-5300
Whatsapp: 5122 4390